Investigating how to Build Elmer on Windows
The instructions for building the Elmer source code are really simple! I decided to try them on Windows. The Developer Command Prompt is necessary for cmake (as far as I can tell). Note that C, C++, and Fortran compilers are required for building Elmer.
cd \dev\repos
mkdir fem
git clone git://www.github.com/ElmerCSC/elmerfem
mkdir build
cd build
cmake -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install ../elmerfemI discovered that a Fortran compiler is required when I got this error on my first build attempt:
-- Building for: Visual Studio 17 2022
-- The Fortran compiler identification is unknown
-- The C compiler identification is MSVC 19.32.31326.0
-- The CXX compiler identification is MSVC 19.32.31326.0
CMake Error at CMakeLists.txt:34 (PROJECT):
No CMAKE_Fortran_COMPILER could be found.Line 34 of CMakeLists.txt – PROJECT(Elmer Fortran C CXX) – uses the PROJECT cmake command to set the project name to “Elmer” and specify the programming languages required, hence the build failure above.
Installing a Fortran Compiler – GFortran?
GFortran looks like the only free Fortran compiler out there so I grabbed the compiler from Fortran, C, C++ for Windows (equation.com) as recommended by Installing GFortran – (fortran-lang.org). The newly installed Fortran compiler was not automatically detected by CMake. Based on the discussion at c++ – Error: No CMAKE_Fortran_COMPILER could be found for Visual Studio 2019 Fortran support – Stack Overflow, I made this change to CMakeLists.txt to pick up the GFortran compiler:
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -21,6 +21,8 @@ if(APPLE)
# option(HUNTER_ENABLED "Enable Hunter package manager support" OFF)
# set (CMAKE_GENERATOR "Unix Makefiles" CACHE INTERNAL "" FORCE)
# set(CMAKE_TRY_COMPILE_TARGET_TYPE "STATIC_LIBRARY")
+else()
+ set(CMAKE_Fortran_COMPILER "C:/dev/software/gcc/bin/gfortran.exe")
endif()Unfortunately, that wasn’t sufficient to address the build failure. Interestingly, someone else ran into this exact same issue at windows – The MinGW gfortran compiler is not able to compile a simple test program – Stack Overflow. Sad times though when StackOverflow does not have an answer! Their solution for specifying a custom compiler is much cleaner – simply define the CMake variable when invoking cmake!
cmake -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=C:/dev/software/gcc/bin/gfortran.exe ../elmerfemSearching for the error message “The Fortran compiler identification is unknown (bing.com)” reveals an existing GitHub issue issue Cannot build using cmake with gfortran on Windows — the Fortran compiler identification is unknown · Issue #328 · fortran-lang/stdlib. Someone mentioned that the MinGW compiler worked fine.
Installing a Fortran Compiler – MinGW
Via Cygwin
The MinGW-w64 downloads looked promising. Since I already had Cygwin installed, I installed the GFortran package. The path to the GFortran compiler can be retrieved using the Cygwin command cygpath -w `which gfortran` and passed to CMake. That still didn’t work.
setup-x86_64.exe q -P gcc-fortran
cmake -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=C:/dev/cygwin64/bin/gfortran.exe ../elmerfemAt least that showed the mingw Fortran compiler package name mingw64-x86_64-gcc-fortran. Interestingly, that package is marked already installed!
Via MSYS2
Since Cygwin didn’t simply work, I decided to try installing MSYS2 (before resorting to uninstalling the Cygwin gcc-fortran package). The Fortran compiler is installed by MSYS2. Once setup completes, CMake also fails when using the MinGW Fortran compiler!
cmake -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=D:/dev/Software/msys64/mingw64/bin/gfortran.exe ../elmerfemDebugging the Fortran Detection Failure
Since none of the compilers work, let’s take a closer look at the error:
$ cmake -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=C:/dev/software/gcc/bin/gfortran.exe ../elmerfem
-- The Fortran compiler identification is unknown
-- Detecting Fortran compiler ABI info
-- Detecting Fortran compiler ABI info - failed
-- Check for working Fortran compiler: C:/dev/software/gcc/bin/gfortran.exe
-- Check for working Fortran compiler: C:/dev/software/gcc/bin/gfortran.exe - broken
CMake Error at C:/Program Files/Microsoft Visual Studio/2022/Preview/Common7/IDE/CommonExtensions/Microsoft/CMake/CMake/share/cmake-3.22/Modules/CMakeTestFortranCompiler.cmake:61 (message):
The Fortran compiler
"C:/dev/software/gcc/bin/gfortran.exe"
is not able to compile a simple test program.
It fails with the following output:
Change Dir: D:/dev/repos/fem/build/CMakeFiles/CMakeTmp
Run Build Command(s):C:/Program Files/Microsoft Visual Studio/2022/Preview/Common7/IDE/devenv.com CMAKE_TRY_COMPILE.sln /build Debug /project cmTC_4528a &&
Microsoft Visual Studio 2022 Version 17.3.0 Preview 1.0 [...].
Copyright (C) Microsoft Corp. All rights reserved.
The operation could not be completed. The parameter is incorrect.
Use:
devenv [solutionfile | projectfile | folder | anyfile.ext] [switches]
...To get a sense of what could be going wrong, I opened the folder containing the temporary project CMake is trying to build. Its contents are deleted before CMake terminates. However, the build was slow enough for me to copy all the files into another temp folder to repro this failure. Running the devenv.com command above fails with the same error.
Interestingly, loading the solution in Visual Studio results in an error because one of the projects cannot be loaded! However, that project file has a .vfproj extension (which seems specific to the Intel Fortran compiler, e.g. as described at Cannot open vfproj file in visual studio 2017 – Intel Communities).
Looks like it’s the CMakeTestFortranCompiler.cmake file that is generating Intel Fortran projects. The first check that file is:
if(CMAKE_Fortran_COMPILER_FORCED)
# The compiler configuration was forced by the user.
# Assume the user has configured all compiler information.
set(CMAKE_Fortran_COMPILER_WORKS TRUE)
return()
endif()The CMAKE_Fortran_COMPILER_FORCED define can be used to bail out of the custom configuration so define it when invoking cmake:
cmake -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=D:/dev/Software/msys64/mingw64/bin/gfortran.exe -DCMAKE_Fortran_COMPILER_FORCED:BOOL=TRUE ../elmerfemWe now get a new error! Finally making some progress!
cmake -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=D:/dev/Software/msys64/mingw64/bin/gfortran.exe -DCMAKE_Fortran_COMPILER_FORCED:BOOL=TRUE ../elmerfem
-- The Fortran compiler identification is unknown
CMake Deprecation Warning at cmake/Modules/FindMKL.cmake:2 (CMAKE_MINIMUM_REQUIRED):
Compatibility with CMake < 2.8.12 will be removed from a future version of
CMake.
Update the VERSION argument <min> value or use a ...<max> suffix to tell
CMake that the project does not need compatibility with older versions.
Call Stack (most recent call first):
CMakeLists.txt:308 (FIND_PACKAGE)
-- ------------------------------------------------
-- Looking for Fortran sgemm
-- Looking for Fortran sgemm - not found
-- Looking for pthread.h
-- Looking for pthread.h - not found
-- Found Threads: TRUE
CMake Error at C:/Program Files/Microsoft Visual Studio/2022/Preview/Common7/IDE/CommonExtensions/Microsoft/CMake/CMake/share/cmake-3.22/Modules/FindPackageHandleStandardArgs.cmake:230 (message):
Could NOT find BLAS (missing: BLAS_LIBRARIES)
Call Stack (most recent call first):
C:/Program Files/Microsoft Visual Studio/2022/Preview/Common7/IDE/CommonExtensions/Microsoft/CMake/CMake/share/cmake-3.22/Modules/FindPackageHandleStandardArgs.cmake:594 (_FPHSA_FAILURE_MESSAGE)
C:/Program Files/Microsoft Visual Studio/2022/Preview/Common7/IDE/CommonExtensions/Microsoft/CMake/CMake/share/cmake-3.22/Modules/FindBLAS.cmake:1337 (find_package_handle_standard_args)
CMakeLists.txt:433 (FIND_PACKAGE)
-- Configuring incomplete, errors occurred!
See also "D:/dev/repos/fem/build/CMakeFiles/CMakeOutput.log".
See also "D:/dev/repos/fem/build/CMakeFiles/CMakeError.log".This error is from the FindBLAS module (see FindBLAS source code I’ve linked to in the error log above). It should be able to find BLAS as per this question Can CMake FindBLAS find OpenBLAS? – Stack Overflow.
- https://duckduckgo.com/?q=gfortran+blas
- fortran – Error in linking gfortran to LAPACK and BLAS – Stack Overflow
Installing BLAS
Searching for “pacman blas” leads to fortran – Using BLAS, LAPACK, and ARPACK with MSYS2 – Stack Overflow which points out that you can search for packages using pacman -Ss. The -S flag stands for sync. Use pacman -Sh to see the package sync options. See Package Management – MSYS2 for more details.
# Search for BLAS packages
pacman -Ss blas
# Install mingw BLAS package
pacman -S mingw64/mingw-w64-x86_64-openblas
# Install LAPACK
pacman -S mingw64/mingw-w64-x86_64-lapackThe output should look like this when complete:
$ pacman -S mingw64/mingw-w64-x86_64-openblas
resolving dependencies...
looking for conflicting packages...
Packages (1) mingw-w64-x86_64-openblas-0.3.20-3
Total Download Size: 11.76 MiB
Total Installed Size: 103.67 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages...
mingw-w64-x86_64-openblas-0.3.20-3-any 11.8 MiB 2.26 MiB/s 00:05 [#####...#####] 100%
(1/1) checking keys in keyring [#####...#####] 100%
(1/1) checking package integrity [#####...#####] 100%
(1/1) loading package files [#####...#####] 100%
(1/1) checking for file conflicts [#####...#####] 100%
(1/1) checking available disk space [#####...#####] 100%
:: Processing package changes...
(1/1) installing mingw-w64-x86_64-openblas [#####...#####] 100%
Set the environment variable OPENBLAS_NUM_THREADS to the
number of threads to use.resolving dependencies...This doesn’t address the errors. A search for the exact error message “Could NOT find BLAS (missing: BLAS_LIBRARIES)” reveals a useful GitHub discussion at find_package(BLAS) failed with CMake · Issue #2440 · mxe/mxe. So BLAS_LIBRARIES can simply be defined at the command line!
cmake -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=D:/dev/Software/msys64/mingw64/bin/gfortran.exe -DBLAS_LIBRARIES=D:/dev/Software/msys64/mingw64/lib ../elmerfemWe now get a new error about LAPACK_LIBRARIES and define it as well!
cmake -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=D:/dev/Software/msys64/mingw64/bin/gfortran.exe -DCMAKE_Fortran_COMPILER_FORCED:BOOL=TRUE -DBLAS_LIBRARIES=D:/dev/Software/msys64/mingw64/lib -DLAPACK_LIBRARIES=D:/dev/Software/msys64/mingw64/lib ../elmerfemThis finally gets us past the missing package issues and on to more Fortran compiler errors!
-- Found LAPACK: D:/dev/Software/msys64/mingw64/lib
-- Checking whether D:/dev/Software/msys64/mingw64/bin/gfortran.exe supports PROCEDURE POINTER
-- Checking whether D:/dev/Software/msys64/mingw64/bin/gfortran.exe supports PROCEDURE POINTER -- no
CMake Error at CMakeLists.txt:477 (MESSAGE):
Fortran compiler does not seem to support the PROCEDURE statement.Support for PROCEDURE Statements
CMakeLists.txt:475 is this line INCLUDE(testProcedurePointer). The included script tests the Fortran compiler but does not explain why the test fails. To see the details, append the string : ${OUTPUT} to the end of the string “Checking whether ${CMAKE_Fortran_COMPILER} supports PROCEDURE POINTER — no” (just before the closing quote). The error message now contains additional information – the same error from earlier! Opening the solution in Visual Studio confirms that yet another unsupported .vfproj has been generated.
Change Dir: D:/dev/repos/fem/build/CMakeFiles/CMakeTmp
Run Build Command(s):C:/Program Files/Microsoft Visual Studio/2022/Preview/Common7/IDE/devenv.com CMAKE_TRY_COMPILE.sln /build Debug /project cmTC_77a33 &&
Microsoft Visual Studio 2022 Version 17.3.0 Preview 1.0 [...].
Copyright (C) Microsoft Corp. All rights reserved.
The operation could not be completed. The parameter is incorrect.
Use:
devenv [solutionfile | projectfile | folder | anyfile.ext] [switches]<Updated VS, unfortunately changing the CMake version>. This is the CMakeLists.txt generated for the solution:
cmake_minimum_required(VERSION 3.22.22022201.0)
set(CMAKE_MODULE_PATH "D:/dev/repos/fem/elmerfem/cmake/Modules;C:/Program Files/Microsoft Visual Studio/2022/Preview/Common7/IDE/CommonExtensions/Microsoft/CMake/CMake/share/cmake-3.22/Modules")
cmake_policy(SET CMP0091 OLD)
cmake_policy(SET CMP0126 OLD)
project(CMAKE_TRY_COMPILE Fortran)
set(CMAKE_VERBOSE_MAKEFILE 1)
set(CMAKE_Fortran_FLAGS "")
set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} ${COMPILE_DEFINITIONS}")
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${EXE_LINKER_FLAGS}")
include_directories(${INCLUDE_DIRECTORIES})
set(CMAKE_SUPPRESS_REGENERATION 1)
link_directories(${LINK_DIRECTORIES})
cmake_policy(SET CMP0065 OLD)
cmake_policy(SET CMP0083 OLD)
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY "D:/dev/repos/fem/build/CMakeFiles/CMakeTmp")
add_executable(cmTC_b909d "D:/dev/repos/fem/build/CMakeFiles/CMakeTmp/testFortranProcedurePointer.f90")
target_link_libraries(cmTC_b909d ${LINK_LIBRARIES})
The cmake project command names the generated project CMAKE_TRY_COMPILE and specifies that the Fortran programming language is needed to build the project. At this point, it looks like a question of how the project is generated. Searching the cmake sources for “.vfproj” leads to the documentation at Help/variable/CMAKE_MAKE_PROGRAM.rst · v3.22.0 · CMake. Turns out this is simply the public documentation at CMAKE_MAKE_PROGRAM — CMake 3.23.2 Documentation. Finally get to the generators docs at cmake-generators(7) — CMake 3.22.5.
If the Visual Studio generator is not appropriate, then which one is? Since I’m using MSYS2, I wonder if the MSYS generator is better suited to this build task. Come to think of it, I saw some discussion of makefile generators, e.g. in Cannot build using cmake with gfortran on Windows — the Fortran compiler identification is unknown · Issue #328 · fortran-lang/stdlib. Sure enough, the cmake options docs say -G is how you choose the generator:
cmake -G "MinGW Makefiles" -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=D:/dev/Software/msys64/mingw64/bin/gfortran.exe -DCMAKE_Fortran_COMPILER_FORCED:BOOL=TRUE -DBLAS_LIBRARIES=D:/dev/Software/msys64/mingw64/lib -DLAPACK_LIBRARIES=D:/dev/Software/msys64/mingw64/lib ../elmerfemThat does not work though (in my developer command prompt)
CMake Error: CMake was unable to find a build program corresponding to "MinGW Makefiles". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
CMake Error: CMake was unable to find a build program corresponding to "MinGW Makefiles". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
CMake Error: CMAKE_C_COMPILER not set, after EnableLanguage
CMake Error: CMAKE_CXX_COMPILER not set, after EnableLanguage
-- Configuring incomplete, errors occurred!Looks like I need to try this process in MSYS2.
Custom Generator in MSYS
Running which cmake in MSYS did not find cmake so here’s the version I installed.
$ pacman -Ss cmake
...
mingw64/mingw-w64-x86_64-cmake 3.23.2-1
A cross-platform open-source make system (mingw-w64)
...
$ pacman -S mingw64/mingw-w64-x86_64-cmakeThis doesn’t result in being able to run cmake.exe (even though it exists on disk in D:\dev\Software\msys64\mingw64\bin). Time to hit the docs again: msys2 cmake – Search (bing.com) -> Using CMake in MSYS2 – MSYS2. No red flags there… How about a search for the exact error message: msys bash: cmake: command not found – Search (bing.com) -> c++ – CMake is not found when running through make – Stack Overflow. Aha! The answer there about launching MSYS2 using mingw32.exe leads me to inquire about how I’m launching MSYS2. Turns out I’m launching using the last shortcut below (which launches “D:\dev\Software\msys64\msys2_shell.cmd -msys“) instead of MinGW x64.lnk (which launches “D:\dev\Software\msys64\msys2_shell.cmd -mingw64“). Sure enough, which cmake now shows /mingw64/bin/cmake.
Directory of C:\Users\USERNAME\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\MSYS2 64bit
MSYS2 MinGW Clang x64.lnk
MSYS2 MinGW UCRT x64.lnk
MSYS2 MinGW x64.lnk
MSYS2 MinGW x86.lnk
MSYS2 MSYS.lnkCustom Generator in MinGW
Retrying the command line now makes progress! Notice the Fortran compiler is successfully detected (and the GNU C++ compiler is also selected).
$ cmake -G "MinGW Makefiles" -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=D:/dev/Software/msys64/mingw64/bin/gfortran.exe -DCMAKE_Fortran_COMPILER_FORCED:BOOL=TRUE -DBLAS_LIBRARIES=D:/dev/Software/msys64/mingw64/lib -DLAPACK_LIBRARIES=D:/dev/Software/msys64/mingw64/lib ../elmerfem
-- The Fortran compiler identification is GNU 12.1.0
-- The C compiler identification is GNU 12.1.0
-- The CXX compiler identification is GNU 12.1.0
...The build fails but things are very promising now. The error is because Qt is missing:
-- Building ElmerGUI
-- ------------------------------------------------
CMake Deprecation Warning at ElmerGUI/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED):
Compatibility with CMake < 2.8.12 will be removed from a future version of
CMake.
Update the VERSION argument <min> value or use a ...<max> suffix to tell
CMake that the project does not need compatibility with older versions.
CMake Warning at ElmerGUI/CMakeLists.txt:19 (find_package):
By not providing "FindQt5.cmake" in CMAKE_MODULE_PATH this project has
asked CMake to find a package configuration file provided by "Qt5", but
CMake did not find one.
Could not find a package configuration file provided by "Qt5" with any of
the following names:
Qt5Config.cmake
qt5-config.cmake
Add the installation prefix of "Qt5" to CMAKE_PREFIX_PATH or set "Qt5_DIR"
to a directory containing one of the above files. If "Qt5" provides a
separate development package or SDK, be sure it has been installed.
-- ------------------------------------------------
CMake Error at D:/dev/Software/msys64/mingw64/share/cmake/Modules/FindQt4.cmake:1314 (message):
Found unsuitable Qt version "" from NOTFOUND, this code requires Qt 4.x
Call Stack (most recent call first):
ElmerGUI/CMakeLists.txt:42 (FIND_PACKAGE)
Installing Qt5 does not address the build failure. The new error message:
-- Building ElmerGUI
-- ------------------------------------------------
CMake Deprecation Warning at ElmerGUI/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED):
Compatibility with CMake < 2.8.12 will be removed from a future version of
CMake.
Update the VERSION argument <min> value or use a ...<max> suffix to tell
CMake that the project does not need compatibility with older versions.
-- ------------------------------------------------
-- Qt5 Windows packaging
-- [ElmerGUI] Qt5: 1
-- [ElmerGUI] Qt5 Libraries: Qt5::OpenGL Qt5::Xml Qt5::Script Qt5::Gui Qt5::Core
-- ------------------------------------------------
CMake Warning (dev) at D:/dev/Software/msys64/mingw64/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:438 (message):
The package name passed to `find_package_handle_standard_args` (OpenGL)
does not match the name of the calling package (Qwt). This can lead to
problems in calling code that expects `find_package` result variables
(e.g., `_FOUND`) to follow a certain pattern.
Call Stack (most recent call first):
D:/dev/Software/msys64/mingw64/share/cmake/Modules/FindOpenGL.cmake:443 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
ElmerGUI/cmake/Modules/FindQwt.cmake:10 (INCLUDE)
ElmerGUI/CMakeLists.txt:61 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
-- Found OpenGL: opengl32
CMake Warning (dev) at D:/dev/Software/msys64/mingw64/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:438 (message):
The package name passed to `find_package_handle_standard_args` (Qt3) does
not match the name of the calling package (Qwt). This can lead to problems
in calling code that expects `find_package` result variables (e.g.,
`_FOUND`) to follow a certain pattern.
Call Stack (most recent call first):
D:/dev/Software/msys64/mingw64/share/cmake/Modules/FindQt3.cmake:213 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
D:/dev/Software/msys64/mingw64/share/cmake/Modules/FindQt.cmake:160 (include)
ElmerGUI/cmake/Modules/FindQwt.cmake:11 (INCLUDE)
ElmerGUI/CMakeLists.txt:61 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
-- Could NOT find Qt3 (missing: QT_QT_LIBRARY QT_INCLUDE_DIR)
CMake was unable to find desired Qt version: 3. Set advanced values QT_QMAKE_EXECUTABLE and QT3_QGLOBAL_H_FILE.
-- [ElmerGUI] Qwt: FALSE
-- [ElmerGUI] QWT_LIBRARY: QWT_LIBRARY-NOTFOUND
-- [ElmerGUI] QWT_INCLUDE_DIR: QWT_INCLUDE_DIR-NOTFOUND
-- ------------------------------------------------
CMake Warning (dev) at D:/dev/Software/msys64/mingw64/lib/cmake/Qt5Core/Qt5CoreMacros.cmake:44 (message):
qt5_use_modules is not part of the official API, and might be removed in Qt
6.
Call Stack (most recent call first):
D:/dev/Software/msys64/mingw64/lib/cmake/Qt5Core/Qt5CoreMacros.cmake:431 (_qt5_warn_deprecated)
ElmerGUI/Application/CMakeLists.txt:216 (QT5_USE_MODULES)
This warning is for project developers. Use -Wno-dev to suppress it.
-- ------------------------------------------------
-- BLAS library: D:/dev/Software/msys64/mingw64/lib
-- LAPACK library: D:/dev/Software/msys64/mingw64/lib
-- ------------------------------------------------
-- Fortran compiler: D:/dev/Software/msys64/mingw64/bin/gfortran.exe
-- Fortran flags: -fallow-argument-mismatch -O2 -g -DNDEBUG
-- ------------------------------------------------
-- C compiler: D:/dev/Software/msys64/mingw64/bin/cc.exe
-- C flags: -O2 -g -DNDEBUG
-- ------------------------------------------------
-- CXX compiler: D:/dev/Software/msys64/mingw64/bin/c++.exe
-- CXX flags: -O2 -g -DNDEBUG
-- ------------------------------------------------
-- ------------------------------------------------
-- Package filename: elmerfem-9.0--20220612_Windows-AMD64
-- Patch version: 9.0-
CMake Error at cpack/ElmerCPack.cmake:99 (INSTALL):
INSTALL FILES given directory "D:/dev/Software/msys64/mingw64/lib" to
install.
Call Stack (most recent call first):
CMakeLists.txt:660 (INCLUDE)
-- Configuring incomplete, errors occurred!
See also "D:/dev/repos/fem/build/CMakeFiles/CMakeOutput.log".
See also "D:/dev/repos/fem/build/CMakeFiles/CMakeError.log".
Does this need Qt3? The ElmerGUI documentation says Qt4 (4.8 or higher). FindQt.cmake:160 (in bold above) appears to indicate that only Qt versions 3 and 4 are supported in MinGW. The mix of warnings and “could not find” makes it hard to know exactly what is wrong. The last error, for example, appears to be about the installation files directory. So is there anything wrong with Qt? I’ll assume not.
The cmake docs on installing files doesn’t point to anything peculiar in this scenario but this is a hint that my LAPACK_LIBRARIES variable is most likely wrong. Let’s drop it altogether:
# Clean up old make files
# rm -fr *
cmake -G "MinGW Makefiles" -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=D:/dev/Software/msys64/mingw64/bin/gfortran.exe -DCMAKE_Fortran_COMPILER_FORCED:BOOL=TRUE -DBLAS_LIBRARIES=D:/dev/Software/msys64/mingw64/lib ../elmerfemThe build still fails but right before the error, notice the LAPACK library now has a DLL instead of a directory (below)!
-- ------------------------------------------------
-- BLAS library: D:/dev/Software/msys64/mingw64/lib
-- LAPACK library: D:/dev/Software/msys64/mingw64/lib/libopenblas.dll.a;D:/dev/Software/msys64/mingw64/lib
-- ------------------------------------------------
-- Fortran compiler: D:/dev/Software/msys64/mingw64/bin/gfortran.exe
-- Fortran flags: -fallow-argument-mismatch -O2 -g -DNDEBUG
-- ------------------------------------------------
-- C compiler: D:/dev/Software/msys64/mingw64/bin/cc.exe
-- C flags: -O2 -g -DNDEBUG
-- ------------------------------------------------
-- CXX compiler: D:/dev/Software/msys64/mingw64/bin/c++.exe
-- CXX flags: -O2 -g -DNDEBUG
-- ------------------------------------------------
-- ------------------------------------------------
-- Package filename: elmerfem-9.0--20220612_Windows-AMD64
-- Patch version: 9.0-
CMake Error at cpack/ElmerCPack.cmake:99 (INSTALL):
INSTALL FILES given directory "D:/dev/Software/msys64/mingw64/lib" to
install.
So now it makes sense to drop the BLAS_LIBRARIES definition as well!
# Clean up old make files
# rm -fr *
cmake -G "MinGW Makefiles" -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=D:/dev/Software/msys64/mingw64/bin/gfortran.exe -DCMAKE_Fortran_COMPILER_FORCED:BOOL=TRUE ../elmerfemThis build step now succeeds as indicated by the selection of libopenblas.dll.a as the BLAS and LAPACK library.
-- ------------------------------------------------
-- BLAS library: D:/dev/Software/msys64/mingw64/lib/libopenblas.dll.a
-- LAPACK library: D:/dev/Software/msys64/mingw64/lib/libopenblas.dll.a
-- ------------------------------------------------
-- Fortran compiler: D:/dev/Software/msys64/mingw64/bin/gfortran.exe
-- Fortran flags: -fallow-argument-mismatch -O2 -g -DNDEBUG
-- ------------------------------------------------
-- C compiler: D:/dev/Software/msys64/mingw64/bin/cc.exe
-- C flags: -O2 -g -DNDEBUG
-- ------------------------------------------------
-- CXX compiler: D:/dev/Software/msys64/mingw64/bin/c++.exe
-- CXX flags: -O2 -g -DNDEBUG
-- ------------------------------------------------
-- ------------------------------------------------
-- Package filename: elmerfem-9.0--20220612_Windows-AMD64
-- Patch version: 9.0-
-- Configuring done
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
QWT_INCLUDE_DIR (ADVANCED)
used as include directory in directory D:/dev/repos/fem/elmerfem/ElmerGUI/Application
...
used as include directory in directory D:/dev/repos/fem/elmerfem/ElmerGUI/Application
QWT_LIBRARY (ADVANCED)
linked by target "ElmerGUI" in directory D:/dev/repos/fem/elmerfem/ElmerGUI/Application
...
Looks like I now need to define QWT_INCLUDE_DIR and QWT_LIBRARY. Hmm, I don’t think I even installed QWT.
$ pacman -S mingw64/mingw-w64-x86_64-qwt-qt5
resolving dependencies...
looking for conflicting packages...
Packages (1) mingw-w64-x86_64-qwt-qt5-6.2.0-5
Total Download Size: 29.17 MiB
Total Installed Size: 175.53 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages...
mingw-w64-x86_64-qwt-qt5-6.2.0-5-any 29.2 MiB 1136 KiB/s 00:26 [###...###] 100%
(1/1) checking keys in keyring [###...###] 100%
(1/1) checking package integrity [###...###] 100%
(1/1) loading package files [###...###] 100%
(1/1) checking for file conflicts [###...###] 100%
(1/1) checking available disk space [###...###] 100%
:: Processing package changes...
(1/1) installing mingw-w64-x86_64-qwt-qt5 [#########################################################################################] 100%
Optional dependencies for mingw-w64-x86_64-qwt-qt5
mingw-w64-x86_64-qt5-tools [installed]Now that QWT is installed, we can set the include directory as follows:
cmake -G "MinGW Makefiles" -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=D:/dev/Software/msys64/mingw64/bin/gfortran.exe -DCMAKE_Fortran_COMPILER_FORCED:BOOL=TRUE -DQWT_INCLUDE_DIR=D:/dev/Software/msys64/mingw64/include/qwt-qt5/ ../elmerfemCMake finally succeeds! The output ends with these lines:
-- Generating done
-- Build files have been written to: D:/dev/repos/fem/build
The generated Makefile has targets such as ElmerGUI, elmersolver, AdvectionDiffusion, FluxSolver, etc. The strange thing is that it has a line that sets SHELL = cmd.exe and so a Windows command prompt is launched when you run make.
#==================================================================
# Target rules for targets named ElmerGUI
# Build rule for target.
ElmerGUI: cmake_check_build_system
$(MAKE) $(MAKESILENT) -f CMakeFiles\Makefile2 ElmerGUI
.PHONY : ElmerGUI
# fast build rule for target.
ElmerGUI/fast:
$(MAKE) $(MAKESILENT) -f ElmerGUI\Application\CMakeFiles\ElmerGUI.dir\build.make ElmerGUI/Application/CMakeFiles/ElmerGUI.dir/build
.PHONY : ElmerGUI/fastSome digging around via mingw cmake shell at DuckDuckGo and I’m reading that makefiles from the MinGW Makefiles generator are for use with mingw32-make under a Windows command prompt. Looks like I need the MSYS Makefiles generator.
cmake -G "MSYS Makefiles" -DWITH_ELMERGUI:BOOL=TRUE -DWITH_MPI:BOOL=FALSE -DCMAKE_INSTALL_PREFIX=../install -DCMAKE_Fortran_COMPILER=D:/dev/Software/msys64/mingw64/bin/gfortran.exe -DCMAKE_Fortran_COMPILER_FORCED:BOOL=TRUE -DQWT_INCLUDE_DIR=D:/dev/Software/msys64/mingw64/include/qwt-qt5/ ../elmerfemNow we see the expected SHELL = /bin/sh and running make actually causes code to start building! What a journey! I will write another post with simplified instructions for how to build Elmer (on Windows).
$ make
[ 0%] Building C object matc/src/CMakeFiles/matc.dir/c3d.c.obj
[ 0%] Building C object matc/src/CMakeFiles/matc.dir/clip.c.obj
[ 0%] Building C object matc/src/CMakeFiles/matc.dir/dri_ps.c.obj
[ 0%] Building C object matc/src/CMakeFiles/matc.dir/eig.c.obj
...
Leave a Reply